Differences

This shows you the differences between two versions of the page.

--- seq24 [2015/06/26 02:44]
slackermedia
+++ seq24 [2021/06/03 19:48] (current)
@@ Line 1: / Line 1: @@
-[[{arrowp.png|border:0;background:none;width:0;display:inline-block;position:absolute;top:0;left:0;}scribus|]]
-[[{arrown.png|border:0;background:none;width:0;display:inline-block;position:absolute;top:0;margin-left:2.5em;}sooper|]]
 ====== Seq24 ======
@@ Line 72: / Line 70: @@
-===== Sequencing =====
+===== Sequencing with Seq24 =====
-The main interface is a sequencer of sequences.
+The main interface of Seq24 is a minimalistic sequencer of sequences. The layout is a grid with each cell being defined by brackets. Each cell of the grid is a container for a MIDI pattern.
-Create a new sequence or patch with a right click > New.
 {{ seq24patches.png }}
-In the Piano roll, buttons in lower right:
+To create a new sequence (or "patch"), right-click on any cell and select **New**.
-sequence dumps data to midi
+In the text field in the upper left corner of the piano roll editor that appears, provide a human-readable name for the pattern you are about to create.
-midi through (to hear your synths, this must be on)
+The "piano roll" interface is probably familiar to you if you have done any music editing on a computer, or if you have ever seen a music box or player piano. The default control scheme for the editor can be customised in the **View** menu → **Options**.
-record incoming data (press this to make the recording area "hot")
+In the upper right corner of the window is the **Set MIDI Channel** combo box. Use this to set what MIDI channel Seq24 uses for its **MIDI Out** port. You must set this to whatever channel your synth is plugged into, keeping in mind that these numbers will **not match** the JACK MIDI ports in your routing GUI (like [[patchage|Patchage]] or [[qjackctl|QJackCtl]] because JACK MIDI ports are offset by at least 1 system midi port (_1).
-or record Quantized
-Upper right corner:  set midi channel.
-These numbers will not match up to the JACK midi ports, because JACK midi ports are offset by at least 1 system midi port (_1) and then the bridged ports. this can get confusing.
-Lower Left: Event type (Note On is default, but you can choose from over 100).
+In the piano roll editor window, there are buttons in the lower right corner:
+  * **Sequence dumps data to MIDI**: sends all MIDI data that you enter in the piano roll to the **MIDI Out port**.
+  * **MIDI Through**: sends MIDI that you enter to **MIDI Thru**; for you to hear the synth you are trying to control, this must be ''on''.
+  * **Record incoming data**: is the ''record'' button. Press this to make the recording area "hot"; any key you press on your controller will be read as a note and recorded in your piano roll grid.
+  * **Record Quantized**: records key presses and applies quantization to help you with timing.
 {{ seq24roll.png }}
+There are several options on how to record MIDI, and Seq24 features all of them. You can step sequence, you can play live, you can quantize, you can draw notes in manually, edit note positions, delete, re-time, and so on. You can even, in the **Event Type** button in the lower toolbar, choose the type of MIDI event you send (a **Note On** signal is the default, but you can choose from over 100).
 ===== Playback =====
+One you have a pattern created in Seq24, try playing it with the **Play** button in the lower left corner of the main window.
 {{ seq24play.png }}
+  - Press **Play**
+  - Click a pattern to start it playing. Multiple patters can be played at a time.
+If you want to record this performance, use a modular recorder like [[jackapps|Jack Capture]].
+===== Saving Sessions =====
+A Seq24 session can be saved from the **File** menu.
+Seq24, being a modular sequencer, has no awareness of what is connected to it. All Seq24 does is receive and send MIDI signals. You must save separately any settings you have applied to an individual synth (see the Slackermedia documentation on that synth, or the official documentation, to learn how to save its internal settings). For the layout of your JACK routing, use a JACK session saver such as [[aj|aj-snapshot]].
+When using a modular setup, you should use a session manager. See [[planter|Planter]] for the Slackermedia contextual session management solution or the [[non|Non]] session manager.
 <WRAP tip>
 **See Also** \\
-Non \\
+[[non|Non]] \\
-Muse \\
+[[muse|MusE]] \\
-Rosegraden \\
+[[rosegarden|Rosegraden]] \\
-Qtractor
+[[qtractor|Qtractor]]
+</WRAP>
+<WRAP centeralign>
+<wrap fa>[[scribus|R]]</wrap> <wrap fa>[[start|S]]</wrap> <wrap fa>[[sooper|Q]]</wrap>
 </WRAP>
-[[{arrown.png|border:0;background:none;width:0;display:inline-block;float:right;}sooper|]][[{arrowp.png|border:0;background:none;width:0;float:right;}scribus|]]